Solid-State Drive - HP Elite x2 G8 Maintenance And Service Manual

3. Carefully rotate the top of the battery up (1), and the lift the battery out of the computer (2).
To insert the battery, reverse the removal procedures.

Solid-state drive

To remove the M.2 solid-state drive, use this procedure and illustration.
Table 6-3 Solid-state drive descriptions and part numbers
Description
2 TB, PCIe, TLC
1 TB, PCIe, TLC
512 GB, PCIe, TLC + 32 GB Optane memory
512 GB, SATA-3, self-encrypting drive (SED), Opal 2, TLC
512 GB, PCIe, TLC
512 GB, PCIe
256 GB, SATA-3, self-encrypting drive (SED), Opal 2, TLC
256 GB, PCIe, TLC
256 GB, PCIe
128 GB, SATA-3, TLC
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the display panel (see
3. Disconnect the battery cable from the system board (see
48 Chapter 6 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Display panel on page 42).
40).
Battery on page 46).
Spare part number
L67401-001
L67397-001
L67405-001
L674021-001
L67403-001
L67404-001
L67398-001
L67399-001
L67400-001
L67398-001