Table of Contents
Advertisement
Reverse this procedure to install the rear-facing webcam.
Power/volume button board
Description
Power/volume button board (includes cable, shielding tape, and double-sided adhesive)
Before removing the power/volume button board, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the SIM slot cover (see
5.
Remove the back cover (see
6.
Remove the middle frame (see
7.
Disconnect the battery cable from the system board (see
Remove the power/volume button board:
1.
Release the ZIF connector (1) to which the power/volume button board cable is attached, and
then disconnect the power/volume button board cable from the system board.
SIM slot cover on page
Back cover on page
14).
Middle frame on page
Spare part number
781983-001
13).
16).
Battery on page
19).
Power/volume button board
25
Advertisement
Table of Contents
