Kickstand Hinges - HP Elite x2 G8 Maintenance And Service Manual

1. Insert a tool into the opening in the SIM card tray (1), and then remove the SIM card and tray (2).
2. Disconnect the cable from the ZIF connector on the system board (1).
3. Peel the cable off the computer chassis (2).
4. Remove the two Phillips M1.4 × 1.6 screws (3) that secure the board.
5. Remove the board from the computer (4).
Reverse this procedure replace the SIM card holder board.

Kickstand hinges

To remove the kickstand hinge, use this procedure and illustration.
Table 6-5 Kickstand hinges description and part number
Description
Kickstand hinges
50 Chapter 6 Removal and replacement procedures for authorized service provider parts
Spare part number
L67409-001