Table of Contents
Advertisement
Volume and power button board
Description
Volume and power button board
Before removing the volume and power button board, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off, turn the tablet on, and then shut it down
through the operating system.
2.
Disconnect the power from the tablet by unplugging the power adapter cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the card tray (see
5.
Remove the back cover (see
6.
Remove the battery (see
7.
Remove the middle frame cover (see
Remove the volume and power button board:
CAUTION:
Use care to prevent damaging the ZIF connector and ribbon cable.
1.
Open the ZIF connector (1) to release the ribbon cable.
2.
Remove the volume and power button board (2).
Reverse this procedure to install the volume and power button board.
Card tray on page
14).
Back cover on page
15).
Battery on page
16).
Middle frame cover on page
Spare part number
926161-001
17).
Volume and power button board
23
Advertisement
Table of Contents
