Sim Card Holder Board - HP Elite x2 G8 Maintenance And Service Manual

Remove the solid-state drive:
1. Remove the tape from the solid-state drive (1).
2. Remove the Phillips M1.4 × 1.6 screw (2), and then remove the solid-state drive (3).
To install the solid-state drive, reverse the removal procedures.
NOTE: Solid-state drives are designed with a notch to prevent incorrect insertion.

SIM card holder board

To remove and disassemble the SIM card holder board, use these procedures and illustrations.
Table 6-4 SIM card holder board descriptions and part numbers
Description
SIM card holder board
SIM card holder cable
Before removing the SIM card holder board, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the display panel (see
3. Remove the battery (see
Remove the SIM card holder board:
Preparation for disassembly on page
Display panel on page
Battery on page 46).
Spare part number
M51642-001
L67423-001
42).
40).
SIM card holder board 49