Using A Sim Card (Select Products Only); Determining The Correct Sim Card Size For Your Computer; Inserting A Nano Sim Card - HP Elite x2 G8 Maintenance And Service Manual

Table 2-14 Service label components (continued)
Component
(4) Serial number
Regulatory labels—Provide regulatory information about the computer.
●
Wireless certification labels—Provide information about optional wireless devices and the approval
●
markings for the countries or regions in which the devices have been approved for use.

Using a SIM card (select products only)

Use these instructions to insert a SIM card.
IMPORTANT:
in the wrong direction. The card might also become stuck in the slot. Do not use SIM card adapters. To
prevent damage to the SIM card or connectors, use minimal force when inserting or removing a SIM card.

Determining the correct SIM card size for your computer

Before purchasing a SIM card, follow these instructions to determine the correct SIM card size for your
computer.
1. Go to http://www.hp.com/support, and then search for your computer by product name or number.
2. Select Product Information.
3. Refer to the listed options to determine which card to purchase.

Inserting a nano SIM card

To insert a nano SIM card, follow these steps.
1. Position the computer display-side up on a flat surface, and then lift up the kickstand.
2. Insert the removal tool or a small straightened paper clip (1) into the card tray access hole.
3. Press the tool or clip in gently until the card tray is ejected.
4. Remove the tray (2) from the computer and insert the card (3).
You can damage the SIM card if you insert the wrong size card or insert it or the SIM card tray
Using a SIM card (select products only) 21