Volume Button Board - HP SLATE 8 PLUS Maintenance And Service Manual

Volume button board

Description
Volume button board (includes cable and grounding tape)
Before removing the volume button board, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the top and bottom covers (see
5.
Remove the display panel assembly (see
Remove the volume button board:
1. Remove the Phillips PM1.4×2.5 screw (1) that secures the battery cable bracket to
the system board.
2. Remove the battery cable bracket (2).
3. Disconnect the battery cable (3) from the system board.
4. Release the grounding tape (1) that secures the volume button board to the back cover.
5. Release the ZIF connector (2) to which the volume button board cable is attached, and then
disconnect the volume button board cable from the system board.
24 Chapter 5 Removal and replacement procedures
Top and bottom covers on page
Display panel assembly on page
Spare part number
775646-001
15).
16).