Diagnostics - Siemens SIRIUS M200D Manual

Diagnostics

Diagnostics data can be read from the motor starter in a number of different ways:
● Diagnostics on the device:
– Status LEDs
● Diagnostics via AS-Interface:
– S1 bit in the AS-i status register (AS-i slave status)
– Parameter echo after AS-i command "Write_Parameter"
● Additional diagnostics options:
– Addressing and diagnostic unit
– AS-Interface analyzer
– Using Motor Starter ES via the device interface
– Slave 1 analog values from the extended process image (PII)
– Acyclic transfer of data set DS 200
M200D AS-Interface Standard
Manual, 08/2014, A5E02548958A/RS-AA/004
P0 = 0 → messages, warnings
P0 = 1 → fault messages
7
131