2.3.3
Status indicators
The following LEDs on the front of the starter indicate the device status:
①
②
③
At the inputs and outputs, only the right LED is active.
For a detailed description of the indicators, refer to Diagnostics (Page 132).
2.4
Internal design
The M200D AS-i Standard motor starter contains two separate logical AS-i slaves referred to
in the sections that follow as Slave 1 and Slave 2.
The names "Slave 1" and "Slave 2" are not taken from the AS-i standard, but instead have
been consciously selected in order to distinguish them from "A/B slave".
M200D AS-Interface Standard
Manual, 08/2014, A5E02548958A/RS-AA/004
Indicators for the device status and communication
Indicator for output OUT1
Indicators for inputs IN1 ... IN4
Product family
2.4 Internal design
19