Siemens SIRIUS M200D Manual page 85

Keypad
The keypad has four pushbuttons arranged in a square.
Note
They are only active when the key-operated switch is set to manual mode.
Figure 3-13
Pushbutton Meaning
Continuous
operation / jog mode
Quick stop disable
Clockwise rotation
Counterclockwise
rotation
M200D AS-Interface Standard
Manual, 08/2014, A5E02548958A/RS-AA/004
Keypad
Function
The mode switches every time you press this pushbutton (continuous / jog).
"Continuous" mode is indicated via the corresponding LED (yellow, lit up) (in
manual mode only).
When manual mode is deactivated, the system is reset to jog mode.
The "quick stop" input actions are deactivated for all inputs.
This pushbutton is active in jog mode and continuous operation. In continuous
operation, the "quick stop disable" function can be activated by pressing the
pushbutton once and deactivated by pressing it again.
The yellow LED lights up regardless of the operating mode (as long as the
function is active).
The main circuit for CW operation is activated.
In continuous operation, the main circuit can be activated by pressing the
pushbutton once and deactivated by pressing it again.
With reversing starters, an ongoing action can also be interrupted in continuous
operation by pressing the "CCW rotation" pushbutton.
The green LED lights up regardless of the operating mode (as long as the
selected function is active).
This pushbutton is only enabled for reversing starters.
The main circuit for CCW operation is activated.
In continuous operation, the main circuit can be activated by pressing the
pushbutton once and deactivated by pressing it again.
In continuous operation, an ongoing action can also be interrupted by pressing
the "CW rotation" pushbutton.
The green LED lights up regardless of the operating mode (as long as the
selected function is active).
3.19 Integrated manual local control
Functions
85