Siemens SIRIUS M200D Manual page 112

Configuring/assigning parameters
5.3 Configuring on the DP/AS-i Link Advanced
3. Change to the Configuration tab.
4. Click Selection... to open the slave selection box.
Select the AS-i A/B Slave Universal by double-clicking it
5. Enter the following values for the AS-i profile:
112
Field Value
IO code: 7 (B B B B)
ID code: A
ID1 code: 7 (F)
ID2 code: 5
M200D AS-Interface Standard
Manual, 08/2014, A5E02548958A/RS-AA/004