Siemens SIRIUS M200D Manual page 103

The brake output for the M200D motor starter
The brake voltage is fed to the motor together with the motor infeed via a joint cable (e.g.
6 x 1.5 mm
Hazardous Voltage
Can Cause Death or Serious Injury.
The brake is only switched in a single phase. This therefore means that voltage can be
applied at pin 6 even when the system is switched off.
M200D AS-Interface Standard
Manual, 08/2014, A5E02548958A/RS-AA/004
).
2
WARNING
Mounting/Connecting
4.2 Connecting
103