4.2
Connecting
4.2.1
Solution Partner
More connection technology products can be found in "Siemens Solution Partners"
(www.siemens.com/automation/partnerfinder) under "Distributed Field Installation System".
The Solution Partner Program provides you with a complete range of connection methods in
all the versions available from your preferred suppliers. This gives you the competitive edge
with cost-effective cables in any length and design.
4.2.2
Required components/cables
Selecting the power cables
Hazardous Voltage
Can Cause Death, Serious Injury, or Property Damage
Before starting work, disconnect the system and devices from the power supply.
The cross-section of the power cables must be suitable for the prevailing ambient conditions.
The following factors determine the cross-section:
● The current set on the device
● The cable installation type
● The ambient temperature
● The type of material (PVC, rubber)
M200D AS-Interface Standard
Manual, 08/2014, A5E02548958A/RS-AA/004
DANGER
Mounting/Connecting
4.2 Connecting
97