Mitsubishi Electric MELSERVO-J5 User Manual page 220

Wire size selection examples
Use 600 V Grade heat-resistant polyvinyl chloride insulated wires (HIV wires) for wiring. The following shows the wire size
selection examples.
■200 V class
Servo amplifier
MR-J5-10_
MR-J5-20_
MR-J5-40_
MR-J5-60_
MR-J5-70_
MR-J5-100_
MR-J5-200_
(3-phase power supply input)
MR-J5-200_
(1-phase power supply input)
MR-J5-350_
MR-J5-500_
MR-J5-700_
MR-J5W2-22G_
MR-J5W2-44G_
MR-J5W2-77G_
MR-J5W2-1010G_
MR-J5W3-222G_
MR-J5W3-444G_
*1 Use the size of 2 mm
*2 The wire size shows applicable size of the servo amplifier connector and terminal block. For wires connecting to the servo motor, refer to
the user's manual of each servo motor.
■400 V class
Servo amplifier
MR-J5-60_4_
MR-J5-100_4_
MR-J5-200_4_
MR-J5-350_4_
*1 Use the size of 2 mm
*2 The wire size shows applicable size of the servo amplifier connector and terminal block. For wires connecting to the servo motor, refer to
the user's manual of each servo motor.
■Using servo amplifier with DC power supply input
The wire selection example is the same as that for the AC power supply input.
Selection example of crimp terminals
Precautions
• Crimp terminals are used only for ground wiring.
Symbol
a
b
c
d
6 OPTIONS AND PERIPHERAL EQUIPMENT
218
6.9 Selection example of wires
2
Wire [mm ]
(1) L1/L2/L3/
2 (AWG 14): a
3.5 (AWG 12): b
5.5 (AWG 10): c
8 (AWG 8): d
2 (AWG 14): a
2 (AWG 14): a
2 (AWG 14): a
2 (AWG 14): a
2 (AWG 14): a
2
for compliance with the IEC/EN/UL/CSA standard.
2
Wire [mm ]
(1) L1/L2/L3/
2 (AWG 14): a
2
for compliance with the IEC/EN/UL/CSA standard.
Servo amplifier-side crimp terminal
Crimp terminal
R2-4
3.5-4
R5.5-4
8-4NS, R8-5
(2) L11/L21 (3) P/C
*1
1.25 to 2 (AWG 16 to 14) 2 (AWG 14)
2 (AWG 14)
(2) L11/L21 (3) P/C
*1
1.25 to 2 (AWG 16 to 14) 2 (AWG 14)
Applicable tool
YHT-2210
YHT-2210
YHT-2210
YHT-8S, YA-4
(4) U/V/W/E
AWG 18 to 14
AWG 18 to 10
AWG 18 to 8
AWG 18 to 14
(4) U/V/W/E
AWG 18 to 14
Manufacturer
JST (J.S.T. Mfg. Co., Ltd.)
*2
*2