Mr-Bat6V1 Battery - Mitsubishi Electric MELSERVO-J5 User Manual

MR-BAT6V1 battery

The MR-BAT6V1 lithium primary battery is for MR-BAT6V1SET-A and MR-BT6VCASE. Store the MR-BAT6V1 in the case to
use.
The year and month the MR-BAT6V1 battery was manufactured is indicated on the battery label.
2CR17335A WK17
Plate
Item Description
Battery pack 2CR17335A (CR17335A × 2 pcs. connected in series)
Nominal voltage [V] 6
Nominal capacity [mAh] 1650
Storage temperature [°C] 0 to 55
Operating temperature [°C] 0 to 55
Lithium content [g] 1.2
Mercury content Less than 1 ppm
Dangerous goods class Not subject to the dangerous goods (Class 9)
For details, refer to "Handling of AC servo amplifier batteries for the United Nations Recommendations on the Transport of
Dangerous Goods" in User's Manual (Introduction).
Operating humidity and 5 %RH to 90 %RH (non-condensing)
storage humidity
*1
Battery life Five years after the date of manufacture
Mass [g] 34
*1 Quality of the batteries degrades by the storage condition. The battery life is 5 years from the production date regardless of the
connection status.
11-04
6 V 1650 mAh
The year and month of manufacture
11 USING A DIRECT DRIVE MOTOR
11.8 Battery
11
443