Selection Example Of Wires - Mitsubishi Electric MELSERVO-J5 User Manual

6.9

Selection example of wires

To comply with the IEC/EN/UL/CSA standard for wiring, use the wires described in the MR-J5 Safety
Instructions and Precautions for AC Servos (IB(NA)-0300391). To comply with other standards, use wires that
comply with each standard.
Selection requirements for the wire size are as follows.
Construction requirements: Single wire set in midair
Wiring length: 30 m or less
The following shows the wires used for wiring. Use the wires given in this section or equivalent wires.
Power supply
(2) Control circuit
power supply lead
(5) Power regeneration converter lead
Power regeneration
converter
Regenerative option
(3) Regenerative option lead
(1) Main circuit power supply lead
Servo amplifier
L1
L2
L3
L11
L21
N
-
C
P
+
U
M
V
W
(4) Servo motor power lead
6 OPTIONS AND PERIPHERAL EQUIPMENT
6.9 Selection example of wires
6
217