Avaya S8300 Manual page 72
Converting media server between icc and lsp modes
Hide thumbs
Also See for S8300:
- Replacement manual (70 pages) ,
- User manual (48 pages) ,
- Installing and configuring (31 pages)
Advertisement
Upgrading Communication Manager from 2.x to 3.0 on an S8300 Media Server
17. If the S8300B LSP's
translations have not
synchronized with the
primary controller,
invoke translation
synchronization.
18. Upgrade the G700
Media Gateway
firmware.
Start on page 318.
19. Set Rapid Spanning
Tree
Page 322.
20. Install post-upgrade
IA770 service pack, if
any.
Page 323.
21. Implement any
additional design
changes to voice and/
or voice messaging
networks.
22. Re-register the
S8300B (LSP mode
only) with the Avaya
servicing center.
72 Converting an Avaya S8300 Media Server Between ICC and LSP Modes
Task
Post-upgrade tasks
Steps/Comments
On the primary controller, enter the Linux
command filesync -a trans.
Ensure that the translation synchronization
completed successfully.
Wait several minutes, then check the
timestamp of the LSP's translation files
using the SAT command display lsp on
the primary controller.
Using the Avaya Installation Wizard on the
S8300B Web Interface to upgrade the gateway
firmware is recommended.
Upgrade G700 firmware
Upgrade media module firmware
Advertisement
