Avaya S8300 Manual page 56

Converting an S8300 from LSP to ICC (Communication Manager 2.1 or later)
15. Administer the new
ICC.
Start on page 157.
16. Administer the media
gateway.
Starting on page 170.
17. If using IA770, install
and/or enable
messaging.
18. If running a CM
version later than 2.2,
and using IA770,
administer the S8300B
for H.323 integrated
messaging.
56 Converting an Avaya S8300 Media Server Between ICC and LSP Modes
Task Steps/Comments
Assign node names.
Administer network regions.
Associate other LSPs (if any) with a
network region.
Administer the LSP screen.
Add media gateway.
Repeat for each gateway to be controlled
by the new ICC.
For this scenario, the gateway will not
automatically register with the ICC at this point.
Skip the subtasks, Verify Changes and Save
Translations in this section.
When the gateway finally registers, the media
modules will automatically populate, unless you
are doing administration without hardware
(AWOH). In this case, you will have to enter the
media module types for each slot.
See the appropriate messaging
documentation on the Avaya S8300,
S8500, and S8700 Media Server Library
CD, 555-233-825, or see Avaya IA770
INTUITY AUDIX Messaging Application,
Release 3.0, Installation, Upgrades, and
Troubleshooting (11-300532).
See Avaya IA770 INTUITY AUDIX Messaging
Application, Release 3.0, Installation, Upgrades,
and Troubleshooting (11-300532).