Avaya S8300 Manual page 58

Converting an S8300 from LSP to ICC (Communication Manager 2.1 or later)
25. Verify LSP status (if
any)
26. If the LSPs (if any)
translations have not
synchronized with the
ICC, invoke translation
synchronization.
27. Implement any
additional design
changes to voice and/
or voice messaging
networks.
58 Converting an Avaya S8300 Media Server Between ICC and LSP Modes
Task
Post-conversion tasks
Steps/Comments
On the ICC
At the ICC's SAT prompt, enter display
lsp. The LSP name and IP address
should be listed. The Service State? field
should be in-service/idle.
The Translations Updated should match
the translations date and time on the ICC.
To view the ICC's translations date and
time, enter list configuration
software.
On the ICC, enter the Linux command
filesync -a trans.
Ensure that the translation synchronization
completed successfully. Wait several
minutes, then check the timestamp of the
LSP's translation files using the SAT
command display lsp on the ICC.