Service Call; Cleaning Error - Roland TrueVIS VF2-640 User Manual

Error Messages
Excessive tension was applied to the media, and additional action is necessary to recover from this state. First,
raise the loading lever and adjust the media to create a small amount of slack, and then switch on the sub power.

"SERVICE CALL ****"

An unrecoverable error occurred or part replacement that must be performed by a service technician is re-
quired.
Note the number displayed, and then switch off the sub power. After you switch off the power, inform your au-
thorized Roland DG Corporation dealer of the number that appeared on the display.

"CLEANING ERROR"

The printer made an emergency stop for one of the following reasons.
• Ink ran out during "damper cleaning."
• A pouch tray was pulled out during "damper cleaning."
• A pouch tray was pulled out during the first ink filling procedure for the machine.
Operation cannot be continued. Switch the sub power off by holding down the switch for one second or longer,
and then switch the sub power back on again. Afterward, redo the "damper cleaning" or ink filling from the start.
However, if the printer stopped partway through "damper cleaning," first execute the "SUPER CL." menu item, and
then redo the "damper cleaning."
RELATED LINKS
・ P. 152 "Super Cleaning Method"
194
4. Messages on the Operation Panel