Setting The Temperature During Preheating - Roland TrueVIS VF2-640 User Manual

Setting the Temperature during Preheating

Preheating: State in which the main power and the sub power are switched on and [SETUP] is not lit (state in
which the media setup is not completed).
Procedure
1.
Press [MENU].
2.
Press [▼] several times to display the screen shown below.
MENU
HEATER MENU
3.
Press [▶], then [▼] to display the screen shown below.
HEATER MENU
PREHEATING
4.
Press [▶] to display the screen shown below.
PREHEATING
30゜C
5.
Press [▲] or [▼] to select a setting.
• MENU: The system performs heating to the set temperature at all times, without lowering the tem-
perature during preheating.
• 30°C: The system maintains a temperature of 30°C (86°F) during preheating.
• OFF: The system switches the media heating system off during preheating.
6.
Press [ENTER] to confirm your entry.
7.
Press [MENU] to go back to the original screen.
MEMO
• Default setting: 30°C
30゜C
Adjusting the Ink-drying Method
1. Optimizing the Output Quality
87