Setup Of Sheet Media - Roland TrueVIS VF2-640 User Manual

Setup of Media

Setup of Sheet Media

Load the sheet media on the printer. When you have finished loading the media, [SETUP] lights. This work is refer-
red to as "Setup of Media."
1.
Determine the positions of the media (sheet media).
Procedure
1.
Open the front cover.
2.
Move the media clamps to the outside of the grit rollers on the left and right edges respectively.
3.
Loosen the retaining screws of the media holders, and then draw them to the left and right ends respectively.
4.
Pass the leading edge of the media between the pinch rollers (
34
2. Basic Operations
) and the grit rollers ( ).