Roland TrueVIS VF2-640 User Manual page 146

3.
Perform a printing test to check the results.
Procedure
1.
Load the media.
P. 27 "Setup of Media"
2.
Press [FUNCTION].
3.
Press [▼], then [▶] to display the screen shown below.
CLEANING
TEST PRINT
4.
Press [ENTER].
Printing of the test pattern starts.
5.
Check whether there is dot drop-out or dot displacement in the test pattern.
Missing blocks indicate dot drop-out. Collapsed or inclined blocks indicate dot displacement.
6.
If you have opened the front cover, close it.
If no dot drop-out or dot displacement occurs, this operation is finished. Press [FUNCTION] to go back to
the original screen.
If dot drop-out or dot displacement is present, perform cleaning such as normal cleaning.
RELATED LINKS
・ P. 132 "Printing Tests and Normal Cleaning"
・ P. 135 "Medium Cleaning Method"
・ P. 137 "Powerful Cleaning Method"
Manual Cleaning
2. Regular Maintenance
145