[Dryer Error]; [Service Call]; [Software Error] - Roland TrueVis AP-640 User Manual

Error Messages

[Dryer Error]

[Power Supply Error]
Power is not supplied to the dryer.
Check whether power is supplied to the dryer, such as if the power switch is on, the power cord is con-
nected, the power breaker is not tripped, etc.
[Temperature Increase Error]
A problem occurred while the temperature of the dryer was increasing.
The dryer does not rise to the set temperature. Reload the media and output again.
Other than the above
There may be a problem with the dryer unit.
Try switching off the sub power, followed by the main power, then switching on the main power again, fol-
lowed by the sub power.

[Service Call]

An unrecoverable error occurred or part replacement that must be performed by a service technician
is required.
After turning the power off, contact your authorized dealer.

[Software error]

An error occurred in the internal communication or applications of the machine or part replacement
that must be performed by a service technician is required.
Switch off the main power. Then, switch on the main power again, followed by the sub power. If the error
still occurs, contact your authorized dealer.
234
Messages on the Operation Panel