Roland TrueVIS VF2-640 User Manual page 32

3.
Pass the leading edge of the media between the pinch rollers (
4.
Lower the loading lever (rear).
The media is held in place.
At this time, the message [PRESS ENTER KEY TO SETUP] is displayed on the screen, but do not press [EN-
TER] yet. Proceed to the next step.
5.
(Move to the front of the printer.) Gently hold down the media and raise the loading lever (front).
The media is released.
6.
Hold the media at the center and pull it out, being sure to keep it straight and all areas of the media to be taut.
) and the grit rollers ( ).
2. Basic Operations
Setup of Media
31