The Media Becomes Soiled When Printed; Do The Print Heads Come Into Contact With The Media; Are The Print Heads Dirty; Are The Pinch Rollers Or The Media Clamps Dirty - Roland TrueVIS VF2-640 User Manual

The Media Becomes Soiled When Printed

Do the print heads come into contact with the media?

The height of the print heads may be too low. Also, if the media is not loaded and set up correctly, it may wrinkle
or come loose and contact the print heads.
RELATED LINKS
・ P. 27 "Setup of Roll Media"
・ P. 34 "Setup of Sheet Media"
・ P. 74 "Changing the Print Head Height"

Are the print heads dirty?

The following may cause ink to drip on the media during printing.
• Buildup of fibrous dust (lint) around the heads
• Ink transferred to the heads due to rubbing against the media
If this happens, clean the print heads manually. We recommend carrying out periodic head cleaning.
• Too low humidity
Use the machine in an environment with a humidity of 35 to 80%RH (no condensation).
RELATED LINKS
・ P. 139 "Manual Cleaning"

Are the pinch rollers or the media clamps dirty?

Periodically clean them.
RELATED LINKS
・ P. 127 "Cleaning the Machine"
172
1. Output Quality Problems