Roland TrueVIS VF2-640 User Manual page 96

Menu item
[FEED FOR DRY]
[DRYING TIME]
[MEDIA GAP ADJ. SIMPLE SETTING]
[MEDIA GAP ADJ. DETAIL SETTING]
[CALIBRATION]
[SHEET TYPE] [SHEET WIDTH] [SHEET POS.]
[SIDE MARGIN]
[SCAN INTERVAL]
[VACUUM POWER]
[FULL WIDTH S]
[MEDIA RELEASE]
Reference page
P. 88 "Drying the Trailing Edge of the Printing Area on
the Dryer"
P. 89 "Setting the Drying Time after Printing"
P. 69 "Adjusting the Misalignment of the Ink Landing Po-
sition"
P. 70 "Accurately Adjusting the Misalignment of the Ink
Landing Position"
P. 72 "Reducing Horizontal Bands (Feed Correction Func-
tion)"
P. 76 "Using Transparent Media"
P. 100 "Set the margins."
P. 79 "Using Hard-to-Dry Media"
P. 80 "Using Media That Wrinkles Easily/Does Not Move
Smoothly"
P. 99 "Speeding Up Output for Narrow Media"
P. 81 "Using Sticky Media"
2. Optimizing Work Efficiency
Using Presets
95