Roland TrueVIS VF2-640 User Manual page 78

5.
Press [MENU] to go back to the original screen.
MEMO
• Default setting: "1625 mm"
• When you select the
"CLEAR" setting, printing is performed with media assumed to be at the set media width. Set "SHEET WIDTH" correctly
according to the actual media width. Otherwise, there is a chance that the platen or other parts may become soiled by
ink or that ink may get inside and damage the machine.
3.
Load transparent media in the machine.
Procedure
1.
Load the media.
P. 27 "Setup of Media"
2.
Press [MENU].
3.
Press [▼] several times to display the screen shown below.
MENU
SUB MENU
4.
Press [▶] once, and then press [▼] several times to display the screen shown below.
SUB MENU
SHEET POS.
5.
Press [▶].
The print-head carriage moves to the currently set position, and then the screen shown below is dis-
played.
SHEET POS.
SAVE
6.
Open the front cover.
7.
Press [◀] or [▶] to move the print-head carriage's base point mark to the right edge of the media.
IMPORTANT
If a fixed period of time passes while the setting procedure is in progress, the menu is closed.
Configuring Settings to Match the Properties of the Media
1. Optimizing the Output Quality
77