[High Temperature Error]; [Pump Stop Error]; [Cleaning Error (Ink Pouch Tray)]; [Cleaning Error (Drain Bottle)] - Roland TrueVIS SG3-540 User Manual

・ P. 25 Power Supply Operations

[High Temperature Error]

The temperature of the location where the machine is installed has risen above the ambient tempera-
ture at which the machine can operate.
This message appears when the temperature rises to 42°C (107.6°F) or higher during startup or operation
(when recovering from sleep mode).
Operation cannot be continued. Turn off the sub power.
The displayed temperature is the current ambient temperature of the installation location. Bring the in-
stalled location to a temperature at which operation is possible (20°C to 32°C [68°F to 89.6°F]), allow the
machine to come to room temperature, and then turn on the power.
RELATED LINKS
・ P. 25 Power Supply Operations

[Pump Stop Error]

This message appears when an ink pouch tray is pulled out during pump operation, such as during
cleaning, and is left in this state for 10 minutes or more.
Operation cannot be continued. Switch the sub power off, and then back on.

[Cleaning Error (Ink Pouch Tray)]

A pouch tray was pulled out during the first ink filling procedure for the machine, causing it to make
an emergency stop.
Operation cannot be continued. Before turning the sub power off and then back on, check that the ink
pouch trays are inserted.

[Cleaning Error (Drain Bottle)]

This message appears when the drain bottle is removed during the first ink filling procedure for the
machine.
Operation cannot be continued. Switch the sub power off, and then back on.

[Take-up Unit Communication Error]

This message appears when an error such as the connection being lost during take-up unit setup oc-
curs.
Operation cannot be continued. Switch off the sub power, followed by the main power. Check that the
take-up unit is properly connected, and then once more switch on the main power, followed by the sub
power.

[Service Call]

An unrecoverable error occurred or part replacement that must be performed by a service technician
is required.
Error Messages
Messages on the Operation Panel
311