Roland TrueVIS VF2-640 User Manual page 79

Configuring Settings to Match the Properties of the Media
The print heads are forcibly returned to the home position to prevent them from drying out. In this case, perform the
procedure again from step 2.
MEMO
To quit the procedure for setting the position of the right edge of the media
(1)
Close the front cover.
(2)
Press [▼] to display the screen shown below.
SHEET POS.
CANCEL
(3)
Press [ENTER].
The print-head carriage returns to the home position.
8.
After positioning, close the front cover.
9.
Press [ENTER] to confirm your entry.
This completes setup.
RELATED LINKS
・ P. 27 "Setup of Roll Media"
・ P. 34 "Setup of Sheet Media"
78
1. Optimizing the Output Quality