Roland TrueVIS VF2-640 User Manual page 56

CLEANING
NORMAL CL.
7.
Press [▲] to display the screen shown below.
CLEANING
TEST PRINT
8.
Press [ENTER].
Perform a printing test again to check whether the dot drop-out and dot displacement have been correct-
ed.
9.
Check to make sure the dot drop-out or dot displacement has been corrected.
If the problem persists, try performing normal cleaning again. If the printer has been used for a long peri-
od, dot drop-outs may not be fixed even after performing normal cleaning two or three times. If this is the
case, clean using a different method.
RELATED LINKS
・ P. 135 "When Normal Cleaning Is Not Effective"
Preparations before Printing Output
1. Printing Method
55