Using Hard-To-Dry Media - Roland TrueVIS VF2-640 User Manual

Using Hard-to-Dry Media

This setting is used to extend the drying time when the ink dries poorly even if the dryer is used.
Procedure
1.
Press [MENU].
2.
Press [▼] several times to display the screen shown below.
MENU
SUB MENU
3.
Press [▶] once, and then press [▼] several times to display the screen shown below.
SUB MENU
SCAN INTERVAL
4.
Press [▶] to display the screen shown below.
SCAN INTERVAL
OFF
5.
Press [▲] or [▼] to select a value.
Larger values cause the media to move more slowly, enabling you to extend the drying time accordingly.
6.
Press [ENTER] to confirm your entry.
7.
Press [MENU] to go back to the original screen.
MEMO
• Default setting: "OFF"
• Depending on the software RIP you are using, you can also make this setting in the software RIP. When you have made
the setting in the software RIP, the printer's setting is ignored.
OFF
Configuring Settings to Match the Properties of the Media
1. Optimizing the Output Quality
79