Roland TrueVIS VF2-640 User Manual page 36

5.
Lower the loading lever (rear).
The media is held in place.
At this time, the message [PRESS ENTER KEY TO SETUP] is displayed on the screen, but do not press [EN-
TER] yet. Proceed to the next step.
6.
(Move to the front of the printer.) Gently hold down the media and raise the loading lever (front).
The media is released.
7.
Straighten the media.
Align the media with the line indicated with the arrow in the following figure.
Setup of Media
35
2. Basic Operations