Roland TrueVIS VF2-640 User Manual page 33

Setup of Media
7.
Make sure the right edge of the media is in line with the guide line.
Point
If you want to readjust the media position before securing it in place, redo the procedure from step 2-1. If you just hold
the media to readjust its position forcibly, the media will be skewed during printing or will come loose, which will affect
the printing quality.
8.
Lower the loading lever (front).
The media is held in place.
At this time, the message [PRESS ENTER KEY TO SETUP] is displayed on the screen, but do not press [EN-
TER] yet. Proceed to the next step.
9.
Line up the edges of the media with the centers of the holes of the media clamps (left and right).
32
2. Basic Operations