Operation; Function Selection Mode; Selecting And Starting A Preparation Programme - Bosch MUC 2 RU Series Instruction Manual

en

Operation

Operation

Function selection mode

In function selection mode, all preparation
programmes are selected and all settings
are made on the appliance. To do this,
perform the following steps:
W Warning
Risk of burns!
During operation, the appliance must never
be used without the pan and the steam
outlet inserted.
Caution!
Each time prior to operation, check the
appliance for damage, completeness,
cleanliness and proper installation.
X "Before using for the first time" see
page 8
1� The appliance is ready to use. Press
button B in order to access function
selection mode.
In function selection mode, button B and
the indicator [ мой режим ] (my mode) are
permanently lit. Button G flashes. "00:00"
is shown in the display.
Note: If no input is made on the control
panel within 5 minutes, the appliance auto-
matically switches to standby mode.
10
MUC_2-4_RU_8001013355.indb 10
Selecting and starting a
preparation programme
There are 16 pre-configured preparation
programmes available to choose from.
X "List of preparation programmes" see
page 19
1� Fill the appliance with the desired
ingredients. To do this, open the lid and
pour the ingredients into the pan. The
measuring scale on the inside of the pan
can also be used to read the quantity.
Caution!
■ Do not fill the pan beyond the marking
[ 4.0 liter]!
■ Use only the spatula provided for stirring
(do not use metal cutlery).
2� Close the lid and press button B to
access function selection mode.
Note: certain preparation programmes
or steps are carried out with the lid open.
X See recipe book provided
3� Keep pressing button D until the
desired preparation programme is
selected.
The corresponding LED lights up in the
control panel and the pre-configured prepa-
ration time for the selected preparation
programme flashes.
10.08.2015 12:44:52