Data Link Connector - BMW S 1000RR Rider's Manual

For this purpose, press in the
snap-in lugs on the fuse holder
on the left and right.
NOTICE
If the fuses blow frequently, have
the electrical system checked by
an authorized specialized work-
shop, preferably an authorized
BMW Motorrad retailer.
Install the fuse holder 1 in the
holder.
Installing rider's seat (
Fuse assignments
1 15 A
Instrument cluster
Anti-theft alarm system
74).
(DWA)
Ignition switch
Diagnostic socket
2 7.5 A
Multifunction switch, left
Tire Pressure Monitor
(TPM)
3 40 A
Alternator regulator

Data link connector

Releasing the data link
connector
CAUTION
Incorrect procedure followed
when disconnecting the data
link connector for the On-
Board Diagnostics.
Motorcycle experiences malfunc-
tions
Only have the data link con-
nector disconnected by a spe-
cialist workshop or other autho-
rized persons during your next
BMW Service appointment.
Have the work performed by
appropriately trained staff.
Refer to the vehicle manufac-
turer specifications.
with passenger package
Remove passenger seat
( 72).
10
197
z
OE