BMW S 1000RR Rider's Manual page 108

To reduce damping: turn ad-
6
justment screw to the left in –
direction using tool from on-
106
board tool kit.
Compression stage, ba-
sic setting, rear
Turn the adjustment screw 1
in direction + as far as it will
go, then 5 clicks in direction –.
z
(Road mode with rider 187 lbs
(85 kg))
Turn the adjustment screw 1
in direction + as far as it will
go, then 3 clicks in direc-
tion –. (Racing mode with rider
187 lbs (85 kg))
Adjusting the rebound-
stage damping on the rear
wheel
without Dynamic Damping
Control (DDC)
Hot exhaust system
Burn hazard
Do not touch hot exhaust
system.
Park motorcycle on a level, firm
surface.
Adjust rebound-stage damping
using adjustment screw 1.
OE
CAUTION
To increase damping: turn ad-
justment screw 1 in direction A
using tool from onboard tool
kit.
To reduce damping: turn ad-
justment screw 1 in direction B
using tool from onboard tool
kit.
Rebound stage, basic
setting, rear
Turn the adjustment wheel in
direction A as far as it will go,
then 5 clicks in direction B.
(Road mode with rider 187 lbs
(85 kg))