Data Link Connector - BMW C 400 X Rider's Manual

NOTICE
The operation described here for
the left fairing side panel applies
analogously to the right side.
Lift the fairing side panel 2
slightly at the edges.
Pull the mounting clips 3 of the
fairing side panel 2 as evenly
as possible out of the mounts.
https://www.motorcycle-manual.com/
Install fairing side panel
Check whether all mounting
clips 3 are installed on the fair-
ing side panel 2.
Position the fairing side panel 2
and push the mounting clips 3
evenly into the mounts.
NOTICE
The operation described here for
the left fairing side panel applies
analogously to the right side.
Install the screws 1 for the fair-
ing side panel.

Data link connector

Removing the diagnostic
connector
Requirement
The data link connector is lo-
cated under the battery compart-
ment cover by the leg shield.
Remove battery cover (
10
167
z
166).