Under the hump cover
11
204
1
Connector for optional ac-
cessories at the rear
z
Mount special and racing
accessories
Requirement
To access connectors, remove
respective fairing side panel, pas-
senger seat and/or hump cover.
Removing the fairing side panel
with engine spoiler (
with passenger package
Remove passenger seat
(
72).
Remove the hump cover
(
72).
Removing the hump trim panel
(
189).
Unlock protective cap or ter-
minating resistor and pull off
connector.
Mount special or racing acces-
sories.
NOTICE
Observe installation instructions
of special or racing accessories.
NOTICE
So that the wiring harness can
be correctly positioned and the
wiring harnesses with the con-
nectors are not routed under ten-
sion, the cable times must not be
tightened until the end.
188).
OE
ATTENTION
Penetration of dirt and mois-
ture in the open connector
Malfunctions
Remount cover cap or termi-
nating resistor after removing
connector.
Remount cover cap or termi-
nating resistor after removing
connector.
Install fairing side panel
(
189).
with passenger package
Install passenger seat (
Install the hump cover (
Installing the hump trim panel
(
191).
OE
73).
72).