BMW S 1000RR Rider's Manual page 63

Press and hold button 1
until the DTC indicator light
changes its behavior.
Immediately after pressing but-
ton 1, the DTC system status ON
is displayed.
DTC indicator and warning
light lights up.
Possible DTC system
status OFF! is displayed.
Release button 1 after
changeover of the status.
The new DTC system
status OFF! is displayed for a
short time.
DTC indicator and warning
light remains illuminated.
The DTC function is switched
off.
Switching on DTC
Press and hold button 1
until the DTC indicator light
changes its behavior.
Immediately after pressing
button 1, the DTC system
status OFF! is displayed.
DTC indicator and warning
light goes out, and begins
to flash if self-diagnosis has not
been completed.
Possible DTC system status ON
is displayed.
Release button 1 after
changeover of the status.
DTC indicator and warning
light remains off or contin-
ues to flash.
The new DTC system status ON
is displayed for a short time.
The DTC function is switched
on.
As an alternative, the ignition
can also be turned off and then
on again.
4
61
z