Diagnostic Connector - BMW F 900 R 2019 Rider's Manual

ATTENTION
Jumpering of blown fuses
Risk of short-circuit and fire
Never attempt to jumper a
blown fuse.
Always replace a defective fuse
with a new fuse of the same
amperage.
Consult the fuse assignment
diagram and replace blown
fuse 1 or 2.
NOTICE
If fuse defects recur frequently
have the electric circuits checked
by a specialist workshop,
preferably an authorised
BMW Motorrad dealer.
Fuse box
10 A (Slot 1: instrument
cluster, alarm system (DWA),
ignition lock, diagnostic socket,
coil main relay)
7.5 A (Slot 2: multifunction
switch left, tyre pressure con-
trol (RDC))
Re-connect the connector.
Install the seat ( 92).

Diagnostic connector

Disengaging diagnostic
socket
CAUTION
Incorrect procedure
followed when loosening the
diagnostic connector for the
on-board diagnosis
Motorcycle experiences malfunc-
tions
Only have the diagnostic con-
nector loosened by a specialist
workshop or other authorised
persons during your next BMW
Service appointment.
Have the work performed by
appropriately trained staff.
Refer to the vehicle manufac-
turer specifications.
Remove the seat (
Press locks 1 on both sides.
9
183
z
92).