Table of Contents
Advertisement
Data link connector
Removing the diagnostic
connector
CAUTION
Incorrect procedure followed
when disconnecting the data
link connector for the On-
Board Diagnostics.
Motorcycle experiences malfunc-
tions
Only have the data link con-
nector disconnected by a spe-
cialist workshop or other autho-
rized persons during your next
BMW Service appointment.
Have the work performed by
appropriately trained staff.
Refer to the vehicle manufac-
turer specifications.
Remove battery cover (
Press the hook 1 and lift out
the data link connector 2.
Press the locking mecha-
185).
nisms 3 on both sides.
Remove the data link connec-
tor 2 from the bracket 4.
The diagnosis and information
system interface can be con-
nected at the diagnostic con-
nector 2.
Secure the data link
connector
Disconnect the diagnosis and
information system interface.
Plug the seat data link connec-
tor 2 into the bracket 4.
The locking mechanisms 3 en-
gage on both sides.
Connect the bracket 4 to the
mount 1.
9
189
z
Advertisement
Table of Contents
