Hill Start Control - BMW S 1000RR Rider's Manual

Hill Start Control

4
Display
66
z
The symbol 1 for the drive-
off assistant is displayed in the
Pure Ride view and in the upper
status line.
Using Hill Start Control
Requirement
The vehicle is at a standstill.
ATTENTION
Drive-off assistant failure
Accident hazard
Manually brake to secure the
vehicle.
NOTICE
Hill Start Control is only a con-
venience system for easier hill-
starting and should, therefore,
not be confused with a parking
brake.
Apply handbrake lever 1 or
footbrake lever firmly and then
release again.
Green stop symbol is dis-
played.
Hill Start Control is activated.
To switch off the.Hill Start
Control, activate the handbrake
lever 1 or the footbrake lever
again.
Stop symbol disappears.
Alternatively, drive off in 1st or
2nd gear.
NOTICE
Hill Start Control is deactivated
automatically when driving off.
The stop symbol disap-
pears after the brake has
been released completely.
Hill Start Control is deactivated.
More information about Hill
Start Control can be found in
the Technology in detail chap-
ter:
Hill Start Control function
( 165)