Front Wheel Stand - BMW S 1000RR Rider's Manual

3 without Dynamic Damp-
ing Control (DDC)
Adjusting the rebound-
stage damping on the
rear wheel (
without Dynamic Damp-
ing Control (DDC)
Adjusting the compres-
sion damping on rear
wheel ( 105).
4 Spare fuses
7.5 A
15 A
5 Plastic top part
Adjusting the spring
preload on the front
wheel ( 100).
6 Torx wrench T30
Remove and install trim
panel components.

Front wheel stand

OE
Mount auxiliary stand on
front wheel
106).
ATTENTION
OE
Use of the BMW Motorrad
front wheel stand without an
additional center or auxiliary
stand
Component damage cause by
tipping over
Place the motorcycle on the
center stand or an auxiliary
stand before lifting it with the
BMW Motorrad front wheel
stand.
Place motorcycle on an auxil-
iary stand; BMW Motorrad rec-
ommends the BMW Motorrad
auxiliary stand.
Mounting the rear-wheel stand
( 170).
Use the basic stand (83 30 0
402 241) with the mounting
pieces (83 30 2 152 839).
Insert the service adapter (83
30 2 152 840) 1 into the front
suspension at the left and right.
10
169
z