Laptimer - BMW S 1000RR Rider's Manual

LAPTIMER

Start time recording
Go to menu Sport and switch
to the Sport 2 or Sport 3
display.
Start engine.
Press button 1.
The time recording is running.
Each time when riding over the
Start/Finish line, press button 1
again to start the recording for
the next racing lap.
The data of the preceding race
lap will be saved.
The time for the current lap
restarts at 00:00:00.
The stopped time of a racing
lap is displayed for a config-
urable Display time be-
fore the system switches to
the current time for the current
racing lap.
If the display mode is exited
during a recording, then the
recording continues to run.
Ending time recording and
managing times
Requirement
The Sport 2 or Sport 3 display is
shown.
Press MENU rocker button
down.
The menu LAPTIMER is dis-
played.
End recording can be used
to end a recording that is cur-
rently in progress.
Laps can be used to go to the
current lap times and riding
data. 99 laps can be saved.
If you do not delete any laps
after reaching the maximum,
any further laps will overwrite
the first laps.
Delete all laps can be
used to delete all laps.
Reset Best Ever can be
used to reset the best ever
racing lap (Best Ever).
Adjusting the lap timer
Go to menu Settings, Vehi-
cle settings, Laptimer.
The following settings are avail-
able:
Debounce time: If the head-
light flasher was operated, the
headlight flasher can be op-
erated again within this time
without affecting the lap time
measurement.
Display time: Within this
time, the stopped time of a lap
8
133
z