BMW S 1000RR Rider's Manual page 119

Phase 1
All indicator and warning lights
are switched on.
After a longer standstill of the
vehicle, an animation is displayed
during the system start.
Phase 2
The general warning light
switches from red to yellow.
Phase 3
All switched on indicator and
warning lights are switched off
one after the other in reverse or-
der.
If one of the indicator and warn-
ing lights does not switch on:
Have the malfunction corrected
as soon as possible at an
authorized specialist workshop,
preferably an authorized
BMW Motorrad retailer.
ABS self-diagnosis
The self-diagnosis routine checks
whether the BMW Motorrad In-
tegral ABS is ready for opera-
tion. The self-diagnosis routine
launches automatically when you
switch on the ignition.
Phase 1
Check on system components
monitored by diagnostic sys-
tem while motorcycle is parked.
ABS indicator and warning
light flashes.
Phase 2
Check wheel sensors while
starting off.
ABS indicator and warning
light flashes.
ABS self-diagnosis
completed
The ABS indicator and warning
light goes out.
ABS self-diagnosis rou-
tine not completed
ABS function is not available
as self-diagnosis has not been
completed. (The motorcycle
must reach a specified mini-
mum speed before the system
can check operation of the
wheel sensors: min 3 mph
(min 5 km/h))
If an ABS error is displayed after
the ABS self-diagnosis is com-
pleted:
It remains possible to continue
riding. Bear in mind that nei-
ther the ABS function nor the
integral function is available.
Have the malfunction corrected
as soon as possible at an
authorized specialist workshop,
preferably an authorized
BMW Motorrad retailer.
7
117
z