BMW S 1000RR Rider's Manual page 111

Remove the nut 1.
Remove the fixing screw 1.
Turn the right-hand connec-
tor 2 alternately with the left-
hand connector by a maximum
of 90° in each case to set the
desired position.
Install the fixing screw 1.
Position of swinging arm
pivot point connector in
main frame on right
4 lb/ft (5 Nm)
Turn the left-hand connector 2
alternately with the right-hand
connector by a maximum of
90° in each case to set the
desired position.
Ensure that the left-hand con-
nector 2 and right-hand con-
nector are fixed in the same
position (mark).
Install the fixing screw 1.
Position of swinging arm
pivot point connector in
main frame on left
6 lb/ft (8 Nm)
Install the nut 1 and tighten to
the appropriate torque.
6
109
z