BMW S 1000RR Rider's Manual page 31

Value display
The symbols 4 differ in their
display. Different colors are used
depending on the assessment of
value. Instead of numerical val-
ues 8 with units 7, texts 6 are
also displayed:
Color of the symbol
Green: (OK) current value is
optimal.
Blue: (Cold!) current tempera-
ture is too low.
Yellow: (Low! /High!) current
value is too low or too high.
Red: (Hot! /High!) current tem-
perature or value is too high.
White: (---) there is no valid
value. Instead of the value,
dashes 5 are displayed.
NOTICE
The evaluation of the individual
values is possible in part only af-
ter a certain riding duration or
speed. If a measured value can-
not yet be displayed due to un-
fulfilled measurement conditions,
dashes are displayed instead as
placeholders. As long as no valid
measured value is available, no
evaluation is carried out in the
form of a colored symbol.
Check Control dialog
Messages are output as Check
Control dialog 1.
If several Check Control mes-
sages of the same priority are
present, the messages change
in the order in which they oc-
cur, until they are acknowl-
edged.
If the symbol 2 is active, this
can be acknowledged by tilting
the Multi-Controller to the left.
Check Control messages are
dynamically attached as addi-
tional tabs to the pages in the
menu My vehicle (
The message can be called up
3
29
z
79).