BMW S 1000RR Rider's Manual page 186

10
184
Clamping screw in axle
adapter
Tightening sequence: Tighten
z
the screws 6 times, alternating
between one and the other
each time
14 lb/ft (19 Nm)
Set brake caliper onto brake
disc.
Position the brake caliper 2 on
the left and position the cable
routing 3.
Install the screws 1 with the
appropriate torque.
Radial brake caliper in
axle mount
28 lb/ft (38 Nm)
Fasten the cable for the wheel
speed sensor in the holder 1.
Insert the wheel speed sensor
into the bore and fasten with
the screw 2.
Position the brake caliper 2
on the right and install the