BMW S 1000RR Rider's Manual page 215

Bluetooth connection is not established.
Possible cause
Necessary pairing steps were not performed.
Connectivity functions are deactivated because
the racetrack functions are activated.
The communication system is not connected au-
tomatically despite successful pairing.
Too many Bluetooth devices are stored in the hel-
met.
There are additional vehicles with Bluetooth-capa-
ble devices nearby.
Remedy
Refer to the operating instructions of the commu-
nication system for the necessary steps for pair-
ing.
Go to menu Settings and deactivate Race-
track.
Switch off the communication system of the hel-
met and connect again after one to two minutes.
Delete all pairing entries in the helmet (see the
operating instructions of the communication sys-
tem).
Avoid simultaneous pairing with multiple vehicles.
13
213
z